display colour channels individually

You think you have found a bug ? You've got a suggestion to modify PhotoFiltre ? /
Ĉu vi opinias vi trovis malbonadĵon ? Ĉu vi havas sugeston por modifi PhotoFiltre ?

Modérateur : Modérateurs

Shinnen
Régulier(ère)|Régulier|Régulière
Régulier(ère)|Régulier|Régulière
Messages : 129
Inscription : 26 août 2010 1:15
Version de PhotoFiltre : 7.0.0
Système d'exploitation : windows xp sp2
Processeur : Intel p4 2800mhz
Mémoire RAM : 1.5 gig

display colour channels individually

Message par Shinnen »

Hi,
Can anyone tell me how to display the channels of an image (specifically red) individually?
Thanks,
...... john
Antonio
Administrateur(trice)|Administrateur|Administratrice
Administrateur(trice)|Administrateur|Administratrice
Messages : 12731
Inscription : 28 oct. 2003 22:49
Contact :

Re: display colour channels individually

Message par Antonio »

don't know why you need that but you can use for example the filter greylevel and choose the Red channel.
Shinnen
Régulier(ère)|Régulier|Régulière
Régulier(ère)|Régulier|Régulière
Messages : 129
Inscription : 26 août 2010 1:15
Version de PhotoFiltre : 7.0.0
Système d'exploitation : windows xp sp2
Processeur : Intel p4 2800mhz
Mémoire RAM : 1.5 gig

Re: display colour channels individually

Message par Shinnen »

Hi Antonio. Thanks.
I'm trying to figure out how pure the NIR images are, of a camera that
has had it's IR filter removed.
Apparently looking at the individual channels, red green and blue,
will provide some indication of this ..... although I'm not sure how yet how.
Thanks again,
...... john
Antonio
Administrateur(trice)|Administrateur|Administratrice
Administrateur(trice)|Administrateur|Administratrice
Messages : 12731
Inscription : 28 oct. 2003 22:49
Contact :

Re: display colour channels individually

Message par Antonio »

other solution, use color balance filter and set 2 channels to 0 to keep only the wanted channel.

lot of solution :wink:
Tom
Administrateur(trice)|Administrateur|Administratrice
Administrateur(trice)|Administrateur|Administratrice
Messages : 13191
Inscription : 02 févr. 2005 9:35
Contact :

Re: display colour channels individually

Message par Tom »

Hi Shinnen,

did you try the plugin "RGB Layers mixer" ? on this page : http://www.photofiltre-studio.com/plugi ... ins-en.htm
If you choose to extract each layers into separated pictures, you have to check that the RGB values are set on 0%

You can verify that the layers you've got are in the correct RGB value by this back process :
- Open the three layers you've got in the same image, one as background, the two others as layers
- Turn the Blend mode of the two layers as "Screen" mode (Opacity 100%)
- and you will see the exact RGB or HSL values of the original image.
Bien plus facile avec PhotoFiltre. Cordialement.
. . Image . . Image
Shinnen
Régulier(ère)|Régulier|Régulière
Régulier(ère)|Régulier|Régulière
Messages : 129
Inscription : 26 août 2010 1:15
Version de PhotoFiltre : 7.0.0
Système d'exploitation : windows xp sp2
Processeur : Intel p4 2800mhz
Mémoire RAM : 1.5 gig

Re: display colour channels individually

Message par Shinnen »

Hi Antonio/Tom,
Thanks for your suggestions. I'm not really sure how looking at the various channels is going to tell me anything about the purity of my NIR image. I was told this but don't understand it. If anyone could explain it, I'd appreciate it.
...... john
Tom
Administrateur(trice)|Administrateur|Administratrice
Administrateur(trice)|Administrateur|Administratrice
Messages : 13191
Inscription : 02 févr. 2005 9:35
Contact :

Re: display colour channels individually

Message par Tom »

Yet, you know how extrac the pure RGB Layers with PhotoFiltre.
For the IR functions you can try different mode of blend on the RGB layers, but you should ask the specialists of IR how to proceed,
i don't know anything about these techniques.
Bien plus facile avec PhotoFiltre. Cordialement.
. . Image . . Image
Shinnen
Régulier(ère)|Régulier|Régulière
Régulier(ère)|Régulier|Régulière
Messages : 129
Inscription : 26 août 2010 1:15
Version de PhotoFiltre : 7.0.0
Système d'exploitation : windows xp sp2
Processeur : Intel p4 2800mhz
Mémoire RAM : 1.5 gig

Re: display colour channels individually

Message par Shinnen »

Thanks Tom.
..... john
Répondre