Page 3 sur 4

Publié : 15 juin 2004 10:23
par Antonio
J'ai désactiver le lien pour le moment, la suite dans quelques jours...

Publié : 15 juin 2004 15:18
par FrançoisL
Antonio a écrit :Je rajouterai l'option de désactivation du lissage dans le menu Sélection mais je doute qu'il sera utilisé souvent
Il y aura au moins moi pour l'utiliser :wink:

Jogy George's suggestions :
1)It's already done ! Just launch the text tool, then move it to a corner of the screen if it covers your image and click on the color you want to get.

2)This suggestion has been done by cath 4 messages above !
Translation of Pascal's reply :

You can do this indirectly :
-Duplicate your image : Image/Duplicate
-Select the first area you want to select.
-Fill it with a color which is not already in the picture.
-Do this with all the areas and fill them with the same color.
-Use the Baguette magique (Couleur checked, tolérance=0), click on one of the areas you filled.
-Selection/Copy shape
-Go back to the original image.
-Selection/Paste shape

3)This suggestion has already been done.

5)It has not a lot of advantages...

Publié : 15 juin 2004 22:37
par Pascal
Dans la 5.7 il est impossible de coller une image dans une autre:
Quand on fait "Option de collage", puis qu'on choisit une couleur de transparence, l'outil pipette s'enclenche automatiquement (dans la palette d'outils) et quand on clique sur OK, le collage ne s'éffectue pas :oops:

Publié : 16 juin 2004 8:39
par Jogy George
FrançoisL you are really a genius :) and very helpful!

Could you also please explain to me how I can use the Advanced Paint brush tool with other shapes and designs?

Also,
Pascal a écrit :Dans la 5.7 il est impossible de coller une image dans une autre:
Quand on fait "Option de collage", puis qu'on choisit une couleur de transparence, l'outil pipette s'enclenche automatiquement (dans la palette d'outils) et quand on clique sur OK, le collage ne s'éffectue pas :oops:
Yes, I have the same problem too! Maybe we have to wait for Antonio.

Publié : 16 juin 2004 10:29
par FrançoisL
To use the Advanced Paint brush tool with other shapes and designs :
-Make a small squarred image which has a transparency, open it, Edit/Define pattern
-Open another image
-Select the Clone stamp tool, fixed and pattern checked.
-For radius, your image width/2
-Draw
:)
Pas moyen chez moi d'avoir votre bug de collage : je copie une image, je la colle dans une autre, je mets une transparence en option de collage, et il ne se passe aucun bug... :o

Publié : 16 juin 2004 11:11
par Pascal
C'est peut-être un bug sur XP seulement ?

J'ai refais quelques essais et c'est bien au moment ou je clique sur "Options de collage" que le bug commence, l'outil pipette se sélectionne alors tout seul dans la palette d'outil, et le collage s"annule quand je fais OK. :?
Si je ne fais pas "options de collage" je peux valider le collage, mais sans utiliser les options. :oops:

Publié : 16 juin 2004 11:53
par pongiste76
Salut ! Je me permet de vous annoncer que le lien sur la version bêta d'antonio ds le premier post est erroné... :(

Publié : 16 juin 2004 11:53
par Antonio
je sais ou est le bug, il sera corrigé dans la version finale

Publié : 16 juin 2004 11:54
par JogyGeorge
I think there is a bug in the Text Tool.

1) I select text Tool, type a text and press ok.
2) Right click the selection and choose text options to modify click ok.
3) The text is validated even though I did not validate it. Also, the text is stretched accross the entire image if I pressed ok. If I press cancel, the text is validates at same size. [BUG]

Also, if I press undo, only a part of the bottom of the text is removed and not the full text. Another problem is that I cannot undo again. I then have to close the image and open again.

If I press undo and the close the picture, PF does not ask me to save the picture as internally, no change has been made because I pressed undo, It is only the display that is partially undone.

Hope someone can reproduce this .... I am using XP Pro.
Cheers

Publié : 16 juin 2004 11:54
par pongiste76
On a posté en même temps :)

Publié : 16 juin 2004 13:18
par Antonio
Download again for bug correction on Text/Past (color picker)

Publié : 16 juin 2004 14:14
par JogyGeorge
Thank you so much :)

The text and the paste with transparency both work nicely now. Am happy with the wand too :)

Publié : 17 juin 2004 21:39
par cath
Bonjour :wink:

voilà :oops: j'ai deux questions:

Quelle est la fonction de la case "couleur"? :roll:
je vois bien que lorsqu'elle est cochée, la sélection se fait différement, mais j'aimerais bien comprendre son fonctionnement ... :)


Après avoir sélectionné une zone (pas complètement unie) avec la baguette, si j'utilise l'outil de remplissage, je dois cliquer en plusieurs endroits pour arriver à remplir la zone, pourquoi?

à bientôt :wink:
cath

Publié : 17 juin 2004 23:24
par Antonio
L'option "Couleur" sert à sélectionner tous les pixels de l'image qui ont une même couleur, les zones peuvent être disjointes

Quand la sélection est affichée, il faut utiliser "Edition / Contour et remplissage" ou "Edition / Remplir avec le motif" et non le sceau qui remplit seulement des zone continues et qui est indépendant de la sélection.

Publié : 17 juin 2004 23:36
par cath
merci Antonio pour ces précisions :)

à bientôt :wink:

cath